TWP 100 Stain by Amteco®
TWP 100 Stain is an EPA registered wood preservative which contains a unique combination of chemicals which preserve and enhance the natural warmth, beauty and integrity of new and old wood.
TWP 100 Stain is designed for use on:
Benefits of TWP 100 Series:
Penetrates deeply into wood without excessive surface film build, highlighting existing grain patterns with amazing clarity and warmth and is specifically designed to provide protection against the four major causes of wood degradation: wood rot, water, sunlight & mildew.
Will not crack, peel or blister making maintenance an easy task to perform for extended wood protection.
Coverage Rate is 200-400 sq. ft. per gallon. TWP® 100 series is designed to penetrate the wood surface and not build a film. Apply as much material as the wood can absorb. Over application may leave an oily residue on the surface and may cause premature failure of the stain. Any material that has not penetrated 3 hours after application must be removed.
Refer to the Product Data Sheet (PDS) or Product Brochure for preparation, cleaning and application instructions. This product is for above ground use only. TWP Stain dealers can find additional product information on the Material Safety Data Sheets (MSDS).
All 5 Gallon Pail orders of TWP Stain ship FREE when ordering online.
CLICK BELOW TO SEE LOW PRICE OR TO BUY ONLINE
Click here for bulk pricing
* some colors cost more
TWP Stain Colors
Available in 8 popular colors and Clear. TWP® 100 Clear is not intended for color retention and will allow the wood to gray naturally.
TWP® 100 Stain has a V.O.C. of 550 grams/liter. Due to V.O.C. regulations the 100 Series is not available for sale in California, Connecticut, D.C., Delaware, Illinois, Indiana, Maine, Maryland, Massachusetts, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Utah and Virginia. Use TWP® 1500 Series to meet V.O.C. compliance in these states.